Are you looking for best 5 bench vise, we’ve consulted top experts who has in-and-out knowledge about the 5 bench vise. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best 5 bench vise.
This list is undoubtedly the best 5 bench vise available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good 5 bench vise, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a 5 bench vise.
Best 5 bench vise – The Winners!
But these three has some more competitions too, Check out below List of Top 10 best 5 bench vise.
If you are ready to choose a new 5 bench vise, check out our recommendations for the best 5 bench vise. But if you’d like to learn more about the various types of 5 bench vise available and how to choose the right one for you, read on.
List of Top 10 Best 5 bench vise In Detailed
Bestseller No. 1
WEN Bench Vise, 5-Inch, Cast Iron with Swivel Base
- 5-inch by 3/4-inch grated jaws open up to 6 inches wide
- Swiveling base pivots over 120 degrees
- Constructed from heavy duty 36, 000 PSI cast iron
- Over 2950 pounds of clamping force tightly secure your workpiece in place
- Features an onboard 3. 4 by 3. 5-inch anvil
Bestseller No. 2
TEXALAN 5" Heavy Duty Bench Vise Anvil Forged, 360 Swivel Locking Base Desktop Clamp
- [MATERIAL]: Durable cast steel construction
- [FEATURES]: Power serrated steel jaws and clamps for great grip and strength
- [LOCKING BASE]: Double locking swivel base, perfect for turning any direction you want after mounting.
- [JAW]: Replaceable, hardened, forged steel jaws.
- [APPLICATION]: Device on the bench to clamp the workpiece tools for workshop.
SaleBestseller No. 3
Forward 5-Inch Bench Vise Ductile Iron with Channel Steel and 360-Degree Swivel Base HY-30505-5In (5")
- Jaw width: 5"; Jaw Opening: 5"; Throat Depth: 2 3/4"; Pipe Capacity: diameter 3/4" - 2"
- Durable and Sturdy: high strength ductile Iron body (60,000 PSI) with best quality U-channel bar; Rubber washers can prevent the handle from sliding and cancel noise
- Replaceable top machinist jaws and built-in pipe jaws are grooved tooth designed for enhanced grip and higher clamping force(5,500lbs)
- More flexible: 360-degree swivel base with dual locking nuts provides unlimited clamping space and more safety; Tapping work can also be done on the large anvil of the bench vise
- Industrial Grade Vise: This 5" heavy-duty professional vise is suitable for use in the workshop, great for clamping and fixing workpieces
SaleBestseller No. 4
Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil (5", Ductile Iron)
- Jaw width:125mm(5"), Opening: 125mm(5"), Throat Depth: 67mm(2.6"), Clamp force: at least 5500lbs
- More Durable and Sturdy: Material updated, stationary body and floating body are all made from high strength ductile iron, PSI 60,000
- Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, and etc. Tapping work can also be done on the anvil of bench vise
- Great for clamping and fixing workpiece: Higher clamping force; Longer opening; Bigger anvil; Deeper throat depth; Wider jaw; Round workpiece clamping; Microgroove tooth space for better grip; 360 degree swivel base providing unlimited clamping space
- Perfect Dual-Purpose Vises: This 5" vise is suitable for both industrial and DIY home use. The front jaw can be rotated by 360 degree, more convenient for clamping works
Bestseller No. 5
WILTON C-2 Pipe And Bench Vise, 5" Jaw Width, 7" Max Jaw Opening, 5-5/16" Throat Depth (28827)
- Massive cast iron vise body is virtually indestructible, weighing up to 30% more than competing models
- Sealed construction keeps lubrication in and contaminants out for a lifetime of smooth operation
- Precision slide bar eliminates movement in the front jaw regardless of opened distance
- Longer spindle nut ensures smooth movement and a stronger straight-line pull
- Hardened steel replaceable jaw inserts are machine serrated for a safe and secure grip under maximum torque
- Large anvil designed to take a beating while forming and shaping materials
- Locking swivel base with double lockdowns for non-slip hold in any position
Bestseller No. 6
WEN MPV500 5-Inch Heavy-Duty Cast Iron Multi-Purpose Bench Vise with 360-Degree Swivel Base
- 5-inch crosscut jaws open up to 5 inches wide with a 2. 75-inch throat depth
- Lockable base swivels a full 360 degrees
- Constructed from heavy duty cast iron
- Creates up to 5500 pounds of clamping force
- Features an anvil with milled face for maximum accuracy
SaleBestseller No. 7
findmall 5" Bench Vise with Anvil 360° Swivel Locking Base Table Top Clamp Heavy Duty Vice Swivel Base Bench
- 360° Double locking swivel base
- Precision crafted and designed to provide dependable service and satisfaction
- Heavy duty cast steel construction
- Hardened and polished replaceable jaws and large anvil
- Swivel base allow you to get the angle on your workpiece
Bestseller No. 8
Yost Vises 445 Combination Vise | 4.5 Inch Jaw Width Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Cast Iron and Steel U Channel Bar
- COMBINATION VISE: The Yost Vises 445 4.5-inch utility combination pipe and bench vise is made from a 30,000 PSI cast grey iron with steel U channel bar. Equipped with a large anvil work surface. Also has as a replaceable hardened steel serrated top jaws and a large pipe capacity permanent serrated pipe jaw.
- TECHNICAL SPECS: Jaw Width 4.5" (11.43 cm), Jaw Opening 4" (10.16 cm), Throat Depth 2.625" (6.6675 cm), Min Pipe Capacity .125" (0.3175 cm), Max Pipe Capacity 2" (5.08 cm).
- SWIVEL BASE: 360-degree rotatable swivel base with 2 lockdowns.
- HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.
- YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.
- SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual.
- WARRANTY: Comes with a 1-year limited warranty and 90-day return.
Bestseller No. 9
WILTON 855M Mechanics Pro Bench Vise, 5-1/2” Jaw Width, 5" Jaw Opening (28811)
- LARGE ANVIL WORK SURFACE: Accommodates a wide range of striking needs
- ELIMINATES MOVEMENT: Precision-machined slide bar immobilizes front jaw, regardless of opened distance
- BUILT FOR RUGGED USE: 60,000 psi ductile iron movable jaw and base provides greater durability with lighter weight material
- IDEAL POSITIONING: Swivel base rotates 360° and has double lockdowns
- LIFETIME GUARANTEE: This bench vise is built to last, and is backed by Wilton's lifetime warranty
Bestseller No. 10
Olsa Tools 5 Inch Bench Vise | 360° Swivel Base | 7,700 lb Clamping Force | Forged Steel | Table Vise Bench | Red Benchtop Vise | Bonus Mounting Hardware & Rubber Jaw Covers | Professional Grade
- PREMIUM FORGED STEEL - The S45C steel is forged to the extremely high pressure of 90,000 PSI, resulting in a vise that is significantly stronger than cast iron and ductile iron alternatives. This industrial-grade vise can handle a clamping force of up to 9,900 pounds! If you’re looking for a lifetime companion through your toughest jobs, then be confident that our heavy duty bench vise will exceed your expectations.
- SUPERIOR DESIGN - Cheaper vises have handles with rubber ends that are prone to cracking and falling off over time, rendering the handle essentially unusable without a repair. Olsa Tools uses upgraded, all-metal handle stops to ensure your bench vise will be a reliable tool for years to come. When mounted on a workbench, the fixed jaw has been designed to extend over the edge of the table to allow you to clamp long items. The vise has 7 inch wide jaws with a generous 9 inch jaw opening.
- MOUNTING HARDWARE INCLUDED - Unlike other bench vises, our vise comes with bolts (3/8"x3"), nuts, and washers for installation. This allows you to mount the vise to your workbench as soon as you receive it, without needing to take another trip to the hardware store. As a bonus, we have also included a set of protective rubber jaw covers that attach and detach easily with the included magnets. Perfect for getting a firm grip on any delicate materials without scratching or marking them.
- PROFESSIONAL BENCH VISE - This is not your average bench vise, use this bench vise for all kinds of woodwork, metalwork, sawing, drilling, and gluing things together. You can't go wrong with this beast! The 360 degree swivel base rotates easily and can be secured in any orientation you need for the job at hand. The striking red colour of the durable hammer paint will make this vise a sleek addition to your workstation.
- OLSA TOOLS TRUST - Our deep commitment to quality is the reason why tool fanatics like yourself keep coming back to us for more. All Olsa Tools products are backed by a limited lifetime warranty that protects your investment against any manufacturer’s defects. All you need to do is get in touch with us and we’ll make it right by you. Guaranteed.
Hope this list of the best 5 bench vise will be helpful for you. Feel free to contact us if you have any questions about our site or our reviews, and we will be happy to help you with your purchasing decisions in any way we can.